October 9, 2019 NHTSA CAMPAIGN NUMBER: 19V720000
Right Rear Wheel Lug Nuts May Be Loose
A wheel detaching from the vehicle increases the risk of a crash.
NHTSA Campaign Number: 19V720
Manufacturer Hyundai
Motor America
Components WHEELS
Potential Number of Units Affected 48
Summary
Hyundai
Motor America (Hyundai
) is recalling certain 2019 Ioniq Hybrid and 2020 Elantra vehicles. The right-side rear wheel lug nuts may have been insufficiently tightened, allowing the wheel to detach from the vehicle.
Remedy
Hyundai
will notify owners, and dealers will inspect and, if necessary, tighten the lug nuts, free of charge. The recall began November 15, 2019. Owners may contact Hyundai
customer service at 1-800-251-0871. Hyundai
’s number for this recall is 184.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Hyundai has a Recall
IMPORTANT SAFETY RECALL
2020 Elantra and 2019 Ioniq
Right Rear Lug Nut Torque
NHTSA Recall Number: 19V-720
Hyundai
Recall Number: 184
| This is an important Safety Recall. |
This notice applies to your Hyundai
, VIN: XXXXXXXXXXXXXXXXX
Dear <FirstName LastName,>
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Hyundai
has decided that a defect which relates to motor vehicle safety exists in certain model year 2020 Hyundai
Elantra vehicles produced between July 2, 2019 and August 01, 2019 and certain model year 2019 Hyundai
Ioniq vehicles produced between July 3, 2019 and July 23, 2019 by Hyundai
Motor Company (“HMC”) in the Republic of Korea. Our records indicate that your vehicle is affected.
What is the problem?
The lug nuts securing the rear right-hand wheel to the hub assembly on the subject vehicles may have been insufficiently tightened during vehicle assembly, increasing the risk of wheel detachment while driving. A detached wheel while driving could increase the risk of a crash.
What will Hyundai
do?
Your Hyundai
dealer will inspect and tighten the lug nuts, if necessary. This procedure will be performed at NO CHARGE to you.
What should you do?
Please contact your nearest Hyundai
dealer to schedule the recall repair as soon as possible.
The actual time required to perform the installation will take less than one hour, however your vehicle may be needed longer, therefore we recommend scheduling a service appointment to minimize inconvenience.
If you have other questions
If you require further assistance, you may contact the Hyundai
Customer Care Center at 1-855-371-9460. If you believe that the dealer or Hyundai
has failed or is unable to remedy the defect within a reasonable time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue S.E., Washington, D.C. 20590, or call the toll free Vehicle Safety Hot Line at 1-888-327-4236 (TTY: 1-800-424-9153), or go to https://www.safercar.gov.
Thank you for your attention to this important safety matter. We apologize for any inconvenience this may have caused you.
Hyundai
Motor America
Importante Retiro del Mercado por Motivos de Seguridad — Si tiene preguntas llama 1-800-633-5151 y oprima “8”
2 Affected Products
Vehicles
6 Associated Documents
Recall Quarterly Report #1, 2019-4
RCLQRT-19V720-7996.PDF 211.14KB
Recall Quarterly Report #2, 2020-1
RCLQRT-19V720-9637.PDF 211.238KB
Owner Notification Letter(Part 577)
RCONL-19V720-5213.pdf 362.772KB
Recall Acknowledgement
RCAK-19V720-6408.pdf 244.138KB
Defect Notice 573 Report
RCLRPT-19V720-7064.PDF 213.963KB
Recall Quarterly Report #3, 2020-2
RCLQRT-19V720-3178.PDF 211.314KB
Recalls Documents
- Vehicle Fitment - These wheel lug nuts are compatible with Hyundai
Kia Tucson Accent Elantra Sonata Genesis
Tiburon Optima Rio Forte Rondo Soul EV and others, please see below for all fitments exact information. - Features - A solid one piece construction with triple chrome plating and manufactured with heat treated steel to prevent rust and corrosion.
- Material - Constructed of high strength steel, chrome plating, cold forged and heat treated steel. Anti-rusting and anti-stripped, max strength durability replacement.
- Replaces - Factory part numbers 52950-14140, 52950-M1000, 52950-14120, 52950-14100, 9-1000201, 611-253, etc.
- Specs - Wheel Lug Nut M12 x1.5mm Thread, Nut Height: 28mm /Hex: 21mm
- [APPLICABLE VEHICLE]: Aftermarket wheel lug nuts replacement for 2006-2023 Hyundai
Elantra, 2018-2024 Kona, 2000-2022 Santa Fe, 2001-2023 Sonata, 2005-2024 Tucson, 2017-2022 Ioniq. More detailed compatible models are available in the image content, please confirm your model and year before placing an order - [SPECIFICATION]: 20Pcs lug nuts set with M12x1.5 thread pitch - 1.38inch(35mm) height - 3/4inch(19mm) hex - 0.87inch(22mm) width - closed end - 60 degree conical seat - chrome one-piece lug nuts
- [STRICT PROCESSING]: Sposuit lug nuts uses triple chrome plating technology to further enhance their corrosion resistance, and the process of cold forging and heat treatment steel to increase its strength. Precise processing maximizes the service life
- [PRECISION DESIGN]: Our lug nuts adopts an one-piece structure and closed-end design, which can effectively prevent cracking. Strict manufacturing standards and factory testing ensure its tightness and quality
- [SATISFACTION PROMISE]: Ensuring customer satisfaction is our goal. If you have any questions, please contact us. We are committed to serving you with dedication
- [APPLICABLE VEHICLE]: Aftermarket wheel lug nuts replacement for 2006-2023 Hyundai
Elantra, 2018-2024 Kona, 2000-2022 Santa Fe, 2001-2023 Sonata, 2005-2024 Tucson, 2017-2022 Ioniq. More detailed compatible models are available in the image content, please confirm your model and year before placing an order - [SPECIFICATION]: 20Pcs spline lug nuts set with M12x1.5 thread pitch, 1 heavy duty nuts socket - 1.38inch(35mm) height - 0.67inch(17mm) hex - 0.78inch(20mm) width - closed end - 60 degree conical seat - black one-piece lug nuts
- [STRICT PROCESSING]: Sposuit lug nuts uses triple chrome plating technology to further enhance their corrosion resistance, and the process of cold forging and heat treatment steel to increase its strength. Precise processing maximizes the service life
- [PRECISION DESIGN]: Our lug nuts adopts an one-piece structure and closed-end design, which can effectively prevent cracking. Strict manufacturing standards and factory testing ensure its tightness and quality
- [SATISFACTION PROMISE]: Ensuring customer satisfaction is our goal. If you have any questions, please contact us. We are committed to serving you with dedication
- FITMENTS: Compatible with Hyundai
Kia vehicles including Tucson Accent Elantra Sonata Genesis
Tiburon Optima Rio Forte Rondo Soul EV and others, please see below for all fitments exact information. - MATERIAL: Made of high strength steel, chrome plating, cold forged and heat treated steel. Anti-rusting and anti-stripped, max-strength durability replacement
- FEATURES: One-piece construction with triple chrome plating and manufactured with heat treated steel to prevent rust and corrosion
- REPLACES: OEM part # 52950-14140, 52950-M1000, 52950-14120, 52950-14100, 9-1000201, 611-253
- SIZE: M12x1.50 Thread Pitch; Lug Nut Height: 28mm; Hex Size: 21mm
- [APPLICABLE VEHICLE]: Aftermarket wheel lug nuts replacement for 2006-2023 Hyundai
Elantra, 2018-2024 Kona, 2000-2022 Santa Fe, 2001-2023 Sonata, 2005-2024 Tucson, 2017-2022 Ioniq. More detailed compatible models are available in the image content, please confirm your model and year before placing an order - [SPECIFICATION]: 20Pcs lug nuts set with M12x1.5 thread pitch - 1.38inch(35mm) height - 3/4inch(19mm) hex - 0.87inch(22mm) width - closed end - 60 degree conical seat - black one-piece lug nuts
- [STRICT PROCESSING]: Sposuit lug nuts uses triple chrome plating technology to further enhance their corrosion resistance, and the process of cold forging and heat treatment steel to increase its strength. Precise processing maximizes the service life
- [PRECISION DESIGN]: Our lug nuts adopts an one-piece structure and closed-end design, which can effectively prevent cracking. Strict manufacturing standards and factory testing ensure its tightness and quality
- [SATISFACTION PROMISE]: Ensuring customer satisfaction is our goal. If you have any questions, please contact us. We are committed to serving you with dedication
Last update on 2026-05-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.





