May 3, 2021 NHTSA CAMPAIGN NUMBER: 21V308000
Fuel Pipe Not Tightened Properly
An insufficiently tightened fuel pipe may leak fuel, increasing the risk of a fire.
NHTSA Campaign Number: 21V308
Manufacturer Hyundai
Motor America
Components FUEL SYSTEM, GASOLINE
Potential Number of Units Affected 2
Summary
Hyundai Motor America (Hyundai) is recalling certain 2021 Santa Fe vehicles equipped with 2.5-litre Turbo engines. The fuel pipe connecting the high pressure fuel pump to the fuel rail may not have been tightened properly.
Remedy
Dealers inspected and tightened the fuel pipe connection, free of charge. The affected vehicles have been repaired and therefore no owner notification letters will be sent. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai’s number for this recall is 206.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Hyundai has a Recall
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| HYUNDAI | SANTA FE | 2021 |
4 Associated Documents
Recall Quarterly Report #1, 2021-2
RCLQRT-21V308-1832.PDF 211.127KB
Defect Notice 573 Report
RCLRPT-21V308-5013.PDF 214.055KB
Recall Acknowledgement
RCAK-21V308-8158.pdf 645.473KB
Recall Quarterly Report #3, 2021-4
RCLQRT-21V308-9651.PDF 211.307KB
Latest Recalls Documents
- Proven to clean intake valves on GDI engines and turbo systems
- Easily installed through the air intake system
- Highest concentration PEA (Polyether Amine) detergency available
- Proven to remove up to 46% of GDI Intake Valve deposits in 1 hour
- 150X more concentrated than fuel additives
- Removes Carbon Buildup Fast: Breaks down stubborn, baked‑on carbon deposits on intake valves and turbo components, restoring airflow and improving engine performance.
- Boosts Power & Efficiency: Regular use increases power and torque, improves MPG, and reduces rough idle, hesitation, and hard starts.
- Proven High‑Strength Formula: Delivers concentrated cleaning agents directly to intake valves—up to 150× stronger than premium fuel additives—and removes up to 46% of deposits within the first hour.
- No Engine Teardown Required: Safe for GDI and PFI engines; simply spray through the air intake system for professional‑grade cleaning without disassembly.
- Reduces Emissions & Improves Drivability: Helps restore proper combustion, reduce harmful emissions, and smooth out idle and acceleration for a cleaner‑running engine.
- Proven to clean intake valves on GDI engines and turbo systems with advanced Cozol technology
- Increases horsepower and improves air/fuel ratio and MPG by cleaning mass air flow sensors
- Easily installed CRC cleaner through the air intake system to remove deposits
- CRC GDI cleaner dissolves baked-on carbon deposits for smoother idle
- Mass air flow sensor cleaner dries in seconds and is plastic safe
- Formulated for Use In All Fuel-Injected Gasoline Engines, Including GDI
- Contains Polyetheramine (“PEA”) to Dissolve Carbon Buildup in Combustion Chambers
- Cleans ALL Types of Intake Valves, Including Those Found in PFI, TBI, and GDI Engines
- Safe On Catalytic Converters and Oxygen Sensors
- Not For Use In Diesel Engines
- One New Aftermarket Replacement Turbo Ii Pre-Cleaner For Model 46 (With 4.5" Inlet) That Features Ev
- OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering.
- Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product.
- This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications.
- All OEM part numbers and logos are to be used for identification purposes only.
This product presentation was made with AAWP plugin.