NHTSA Campaign Number: 18V305
Manufacturer Hyundai
Motor America
Components VISIBILITY
Potential Number of Units Affected 37
Front and Rear Glass Incorrectly Bonded
If the glass bonding strength is reduced over time, the windshield and rear window may detach while driving, increasing the risk of a crash.
Summary
Hyundai Motor America (Hyundai) is recalling certain 2018 Hyundai Genesis G80 and Genesis G90 vehicles. The windshield and rear window on these vehicles may have been installed with incorrect primer, potentially reducing the glass bonding strength.
Remedy
Hyundai will notify owners, and dealers will replace the front and rear glass, free of charge. The recall is expected to begin June 30, 2018. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai’s number for this recall is 001G.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Genesis has a Recall
Recall Acknowledgement
May 29, 2018
Bestseller No. 1
Polyurethane Windshield Adhesive & Sealant 50ML - High Strength, Fast Curing Formula for Automotive Glass, Car Windscreen, RV Window - Professional Strength, Weather Resistant Crack Repair Glue
- Strong Adhesion – This windshield glue adhesive absorbs shocks and vibrations to keep windshields securely in place. Prevents cracks and leaks, even on rough roads or under extreme stress.
- Quick-Curing & Non-Drip – Our urethane adhesives formula sets quickly without sagging or dripping, significantly reducing hold time. This allows you to complete vertical and overhead applications faster and with a cleaner, more professional finish.
- Weather-Resistant – Whether it’s sweltering summer heat, freezing winter cold, or even extreme temps from -50°C to 180°C, our formula withstands high and low temperatures, UV rays, and moisture—forming an impenetrable seal that shields your vehicle from downpours and humidity, all for long-lasting performance.
- Easy Application – Our polyurethane windshield adhesive comes in a 300ml cartridge compatible with standard caulking guns. It’s ready to use, includes an applicator tip, and just remember to clean the surface before use for smooth, reliable bonding.
- Multipurpose Automotive Adhesive – This auto glass adhesive seamlessly bonds windshields, backlights, sidelights, and glass edges on any vehicle—from cars and trucks to RVs. Designed for both DIY enthusiasts and professional repairs, it’s the go-to solution for durable, leak-proof results every time.
Bestseller No. 2
Windshield Adhesive – Easy to Apply – Fast Curing & Weather Resistant – High-Strength Bond – Professional Polyurethane Auto Glass Adhesive – Windshield Sealant – Repair Kit for Cars, Trucks & SUVs
- GREAT HOLDING POWER: Advanced Mattfix polyurethane windshield adhesive technology delivers strong and reliable adhesion to hold the window firmly in place while creating a secure seal that helps prevent leaks during everyday driving.
- HIGH-STRENGTH BOND: This windshield glue adhesive forms an incredibly strong, durable bond between glass and metal surfaces, ensuring reliable windshield installation without primer while maintaining a permanent holdover time.
- EASY TO APPLY: Easy-to-dispense windshield urethane adhesive flows evenly when used with manual or electric caulking guns, creating a clean, consistent bead without sagging or excessive mess. This car window adhesive is suitable for both professional glass installation and DIY car, SUV, or truck maintenance.
- FAST-CURING FORMULA: Quick-setting windshield adhesive sealant with no-sag properties. It cures rapidly to speed up installation. Mattfix auto glass gluereduces vehicle downtime to just a few hours while delivering a lasting performance.
- WATER & WEATHER RESISTANT: Our car window glue is designed to withstand high and low temperatures, excessive moisture, and road vibrations. This windshield sealant black compound maintains a stable and secure glass positioning during long-term van or motorhome use.
Bestseller No. 3
3M 08609 Window-Weld Super Fast Urethane Windshield Adhesive, High-Strength Fast-Curing One-Part Auto Glass Sealant, 10.5 fl oz (310 mL) Cartridge, Black
- PROFESSIONAL AUTO GLASS BOND: High-strength urethane adhesive bonds windshields securely to vehicle frames for a permanent, weatherproof seal. Helps prevent leaks and withstands road vibrations and extreme temperatures.
- SUPER FAST 1-HOUR CURE: Advanced moisture-curing formula sets quickly with a 10-15 minute work time and achieves safe drive-away strength in as little as one hour (at 73°F). Ideal for professionals to minimize vehicle downtime.
- EASY, NO-MESS APPLICATION: Medium viscosity, non-sag formula won't drip for controlled application on vertical or overhead surfaces. Use any standard 10.5 oz cartridge caulking gun (manual or powered) for precise adhesive placement.
- ONE-PART URETHANE, NO MIXING: Ready-to-use single-component polyurethane adhesive requires no mixing or special equipment. Simplifies windshield replacement with consistent bonding performance and no guesswork.
- VERSATILE & UNIVERSAL USE: Designed for replacing bonded auto glass, including windshields, rear windows, and quarter glass. Also suitable for some non-structural panel bonding applications. Universal fit for cars, trucks, and SUVs.
Bestseller No. 4
3M Auto Glass Urethane Windshield Adhesive, 08693, Medium Viscosity, High-Strength, Fast-Curing, 310 mL/10.5 fl oz Cartridge , Black
- BOND WINDSHIELDS YOUR WAY: Compatible with both manual or powered caulking guns
- FAST-CURING: Adhesive produces rapid results, curing in just 24 hours
- For industrial/occupational use only. Not for consumer use
- HIGH-BOND STRENGTH: Designed for permanent windshield bonding and stationary glass attachment
- MEDIUM-VISCOSITY FORMULA: Non-sag urethane formula makes for clean and easy application
Bestseller No. 5
Betaseal U-428+ HV Fast Cure Auto Glass Urethane Adhesive - Primerless, 310ml (10.5oz) Cartridges (Cartridge, 2, Count)
- OEM Quality - BETASEAL U-428HV is crash tested to a minimum drive away time of 4 hours down to 40°F/4.4°C (FMVSS 212). Please consult glass installation guide for more details. *Professional Use Product* prior knowledge of this product is required.
- 26:1 Thrust ratio professional caulk gun with wide nozzle head (nozzle included), or better is required to properly dispense product.
- For Every Auto Glass Project – This OEM product is ideal for securing and sealing windshields, backglass, stationary glass, and other automotive applications.
- Superior Bonding Strength – Betaseal creates a strong, permanent bond that enhances structural integrity and seals the glass securely. Trusted by automotive manufacturers, it meets the safety standards of FMVSS. Made in the USA
- Primerless Urethane - No primers to glass frit band required. For Bare metal, fresh paint, or to be applied to plastic or encapsulated parts the use of Beatprime # 5504G or 5504GSA must be applied to those areas for safe adhesion.
This product presentation was made with AAWP plugin.